CLEQEE OSC482 PC Virtual Digital Handheld Oscilloscope 2 Channel Bandwidth 20Mhz sampling data 50M with probe USB cable

Last updated Aug 15, 2019 20:11
Rated 4.8/5 based on 9 customer reviews

AC 695,999/piece

Potential Reward lets go up to level 2 for extra bonus 1%
Free Shipping
- Estimated Shipping Time: 15-60 business days


virtual oscilloscope, logic analyzer, 16 channel logic analyzer, virtual oscilloscope, High Quality logic analyzer, China 16 channel logic analyzer Suppliers
Important: You can exchange your Aditif Cash that you have with this CLEQEE OSC482 PC Virtual Digital Handheld Oscilloscope 2 Channel Bandwidth 20Mhz sampling data 50M with probe USB cable product item. If you want to ask personally about this product, you can contact us through support ticket. Please check an alternative buy link to ensure that items can be sent to your country. We will cancel the order if the item cannot be shipped to your country. Thanks.

Recommended Products

Product Description

Buy or Exchange Your Crypto with CLEQEE OSC482 PC Virtual Digital Handheld Oscilloscope 2 Channel Bandwidth 20Mhz sampling data 50M with probe USB cable

Buy Aditif Coin product sale virtual oscilloscope, Buy Quality logic analyzer directly from China 16 channel logic analyzer Suppliers: Cleqee OSC482 PC Virtual Digital Handheld Oscilloscope 2 Channel Bandwidth 20Mhz sampling data 50M with probe USB cable Enjoy Free Shipping Worldwide! Limited Time Sale Easy Return.

OSC_482 Software download:



PC Connection

USB 2.0


2 channels with BNC sockets

Output reference voltage

1KHz square wave, 1.5Vp, 50% duty cycle

Highest sampling rate

50 MSa/s each channel

Vertical resolution

8 Bit

Voltage Range

±5v with x1 probe, ±50v with x10 probe and ±500v with X100 probe (purchased separately)

Typical noise


1v/div selector


500mv/div selector


200mv/div selector


100mv/div selector


50mv/div selector


20mv/div selector

Input coupling


Time range

50ns ~ 2s

Triggering conditions

Software trigger

Rising edge / falling edge according trigger level

Trigger modes

Automatic, single

Trigger source

Channel A

Input resistance

1MΩ impedance / 25pF input capacitance

Memory depth

1K-2M bytes per channel

Overload Protection

± 50 V

Power consumption

Automatic measurement

Maximum, minimum, peak-to-peak, frequency, average, RMS, rise time, positive pulse width, negative pulse width, duty cycle




15.25 x 9.32 x 2.31 cm

Configuring Outputs

Select the IO pin that needs to be used as output and select the corresponding check box OUTPUT, select the output level HIGH or LOW for changing the pin state.

Configuring Inputs

IO pins can be set to to receive TTL levels, by selecting the check box INPUT. By clicking on the refresh button you can get the input level. High level is displayed as a green icon with ‘H’ in the middle, low level is displayed as a gray small icon with ‘L’.

Paperless recorder This chapter introduces the basic concepts and usage of the paperless recorder, a software functional extension of the virtual oscilloscope hardware. 11.1 Basic Concepts of Paperless Recorders

A paperless recorder is a data logger or data acquisition device used to record measurement data over time. A paperless recorder based on virtual oscilloscope hardware has the ability to record the collected or computed data in a storage system inside the software on a time basis, without consuming any paper, pen or ink. Common collected data are voltage, current, etc.

Introduction to Paperless Recorder Software

Common software interface The Recorder software has an interface consistent with the oscilloscope software, so to be familiar to the user. Equipment monitoring After the software interface is opened, the OSC482 device status will be monitored in real time. When the hardware device is connected to the USB port of the PC, the software interface will display a blue background and a message.

If the hardware get disconnected or the software have no access to the device, then the display background will become yellow, showing a text alert.


The paperless recorder software has exclusive access to the OSC482 device. Therefore, the device can be used just with one software at a time.

Set the Total Record Duration

This panel allow to set the recording duration; it can be set in the range 1 minute ~ 3 days.

Set the Sampling Interval This panel allow to set the sampling interval from 1 second to 1 hour. Note The sampling interval cannot be greater than the total recording duration, otherwise it is meaningless. Start and Stop After the driver has been successfully installed, if the oscilloscope is connected when the software is opened, the software automatically turns on the device. If the device is connected before opening the software, it is required to start the device manually by clicking on the Start Device button in the lower right corner of the software. The acquisition can be stopped by clicking the stop button. The Start and Stop button are actually the same button that change according the status of the oscilloscope. When the USB cable is suddenly unplugged during the operations, the software will automatically stop. When the device is not used it is recommended to close the software and then to unplug the device's USB cable.

Product Specifications

  • Brand Name CLEQEE
  • DIY Supplies Electrical
  • Display resolution NO
  • Record Length long
  • Model Number C520&C550 Series
  • Display Size 2.9 Inches & Under
  • IS Battery Demountable No
  • Digital Channels 2
  • Max Waveform Capture Rate 30 000wfm/s
  • Band Width Less than 60MHz
  • Real Time Sampling Rate 50MSa/s

Customer Reviews


average based on global reviews.

User Rating 4.8 (global votes)
5 star
4 star
3 star
2 star
1 star

All 0 Questions & Answers / Customer Discussion

Any question? You can ask us or other users here.

Shipping & Payment

Shipping, There are two key factors which will affect the time you receive your items.

  1. Item processing time
    The exact processing time varies depending on the item. The average processing time is 3 working days, but this can also be affected by the item's stock status. For small quantity orders, the processing time is 1-3 days while larger quantity orders may require 3-7 days.
  2. Shipping methods
    For free shipping, estimated shipping time is 15-60 business days. Delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control. You can ask us to send item via expedited shipping like EMS, DHL with additional fee

Payment, You can make a deposit from Balance point, cryptocurrency and of course through FaucetHub with any coins such as BTC, ETH, XMR, LTC, DOGE, BCH, ZEC, BTX, BLK, DGB, DASH, PPC, XPM, POT, TRX and HORA token. You can PM me at Faucethub to and tip me to deposit. Then you can deposit from wallet balance coins to Aditif Cash.

Seller Guarantee

Return Policy: If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click ‘Confirm Order Received’ or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.

Seller Service: On-time Delivery, If you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click ‘Confirm Order Received’ or exceed confirmation timeframe).

Buyer Protection

Protecting Your Purchase from Click to Delivery

Full Refund, if you don't receive your order
You will get a full refund if your order does not arrive within the delivery time promised by the seller.

Full or Partial Refund, if the item is not as described
If your item is significantly different from the seller’s product description, you can coose

  1. Return it and get a full refund, or
  2. Get a partial refund and keep the item.

Sponsored Products

Powered by Aditif.Net
Your IP:
Cheap Website Traffic